BrOF4-0.25

The tubes used in instrument making and instrumentation

Classification

Country	Section	Category
Country	Section	Category
CIS, Russia, Ukraine	Bronze	Pressure Tin Bronze

Chemical composition

Standard	Fe, %	Si, %	Sn, %	Bi, %	Cu, %	Zn, %	Ni, %	Sb, %	Al, %	Pb, %	P, %
Standard	Fe, %	Si, %	Sn, %	Bi, %	Cu, %	Zn, %	Ni, %	Sb, %	Al, %	Pb, %	P, %
GOST 5017-2006	< 0.02	< 0.002	3.5–4	< 0.002	95.25–96.2	< 0.3	< 0.2	< 0.002	< 0.002	< 0.02	0.2–0.3

Information on suppliers

Wish to advertise here?

Physical characteristics

Temperature, °C	$$E\cdot 10^{9}$$, $$MPa$$	$$\alpha\cdot 10^{6}$$, $$K^{-1}$$	$$\varkappa$$, $$\frac{W}{m\cdot K}$$	$$\rho$$, $$\frac{kg}{m^3}$$	$$R\cdot 10^{-6}$$, $$\Omega\cdot m$$
Temperature, °C	$$E\cdot 10^{9}$$, $$MPa$$	$$\alpha\cdot 10^{6}$$, $$K^{-1}$$	$$\varkappa$$, $$\frac{W}{m\cdot K}$$	$$\rho$$, $$\frac{kg}{m^3}$$	$$R\cdot 10^{-6}$$, $$\Omega\cdot m$$
20	100		84	8830	0.09
100		17.6

Mechanical properties at 20 °C

Rolling	Standard	Size, mm	Tension	Classifiers	$$\sigma _{U}$$, $$MPa$$	$$\epsilon_L$$, %	Treatment
Rolling	Standard	Size, mm	Tension	Classifiers	$$\sigma _{U}$$, $$MPa$$	$$\epsilon_L$$, %	Treatment
Alloy				soft	300–380	40–58
Alloy				solid	500–700	6–10

Brinell hardness number

Rolling	Standard	Classifiers	Value, HBW
Rolling	Standard	Classifiers	Value, HBW
Alloy		soft	550–700
Alloy		solid	1600–1700

Casting and technological parameters

melting point, °C	Hot working temperature, °C	annealing temperature, °C
melting point, °C	Hot working temperature, °C	annealing temperature, °C
1060	700–800	600–650

Analogues

Germany	USA
Germany	USA
2.1016	C51100

Standards

Standard	Description
Standard	Description
GOST 5017-2006	Wrought tin bronzes. Grades

Description of chemical elements

Element	Units of measurement	Description
Element	Units of measurement	Description
Fe	%	Iron
Si	%	Silicon
Sn	%	Tin
Bi	%	Bismuth
Cu	%	Copper
Zn	%	Zinc
Ni	%	Nickel
Sb	%	Antimony
Al	%	Aluminium
Pb	%	Lead
P	%	Phosphorus

Description of physical characteristics

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
$$E\cdot 10^{9}$$	$$MPa$$	Elastic modulus
$$\alpha\cdot 10^{6}$$	$$K^{-1}$$	Coefficient of thermal (linear) expansion (range 20°C–T)
$$\varkappa$$	$$\frac{W}{m\cdot K}$$	Coefficient of thermal conductivity (the heat capacity of the material)
$$\rho$$	$$\frac{kg}{m^3}$$	The density of the material
$$R\cdot 10^{-6}$$	$$\Omega\cdot m$$	Electrical resistivity

Description of mechanical properties

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
$$\sigma _{U}$$	$$MPa$$	Ultimate tensile strength
$$\epsilon_L$$	%	Elongation at break (longitudinal)

Description of the casting and technological parameters

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
melting point	°C	The temperature at which solid crystalline body makes the transition to the liquid state and Vice versa
Hot working temperature	°C	The temperature at which the plastic-deformed metal recrystallizes during the pressure treatment
annealing temperature	°C	The temperature at which the processes return recrystallization and homogenization of the metal to reduce its hardness for subsequent machining