MA1

for weldment simple configuration, valve parts, petrol and oil systems, without carrying heavy loads; max operating temperature: 150 ° C -Duration 200 ° C -kratkovremennaya

Classification

Country Section Category
CIS, Russia, Ukraine Magnesium Wrought Magnesium Alloys

Chemical composition

Standard Fe, % Si, % Be, % Mg, % Mn, % Cu, % Zn, % Ni, % Al, %
GOST 14957-76 < 0.05 < 0.1 < 0.002 96.89–98.7 1.3–2.5 < 0.05 < 0.3 < 0.007 < 0.1

Information on suppliers

Physical characteristics

Temperature, °C $$E\cdot 10^{9}$$, $$MPa$$ $$\alpha\cdot 10^{6}$$, $$K^{-1}$$ $$\varkappa$$, $$\frac{W}{m\cdot K}$$ $$\rho$$, $$\frac{kg}{m^3}$$ $$c\cdot 10^{-3}$$, $$\frac{J}{kg\cdot K}$$ $$R\cdot 10^{-6}$$, $$\Omega\cdot m$$
20 42 125.6 1760 0.061
100 26 1.0048

Mechanical properties at 20 °C

Rolling Standard Size, mm Tension Classifiers $$\sigma _{U}$$, $$MPa$$ $$\epsilon_L$$, % Treatment
Round 165–195 2

Brinell hardness number

Rolling Standard Classifiers Value, HBW
0–0

Casting and technological parameters

linear shrinkage, %
5.4

Analogues

USA Germany
M1A M 2

Standards

Standard Description
GOST 14957-76

Description of chemical elements

Element Units of measurement Description
Fe % Iron
Si % Silicon
Be % Beryllium
Mg % Magnesium
Mn % Manganese
Cu % Copper
Zn % Zinc
Ni % Nickel
Al % Aluminium

Description of physical characteristics

Parameter Units of measurement Description
$$E\cdot 10^{9}$$ $$MPa$$ Elastic modulus
$$\alpha\cdot 10^{6}$$ $$K^{-1}$$ Coefficient of thermal (linear) expansion (range 20°C–T)
$$\varkappa$$ $$\frac{W}{m\cdot K}$$ Coefficient of thermal conductivity (the heat capacity of the material)
$$\rho$$ $$\frac{kg}{m^3}$$ The density of the material
$$c\cdot 10^{-3}$$ $$\frac{J}{kg\cdot K}$$ The specific heat of the material (range 20°C–T)
$$R\cdot 10^{-6}$$ $$\Omega\cdot m$$ Electrical resistivity

Description of mechanical properties

Parameter Units of measurement Description
$$\sigma _{U}$$ $$MPa$$ Ultimate tensile strength
$$\epsilon_L$$ % Elongation at break (longitudinal)

Description of the casting and technological parameters

Parameter Units of measurement Description
linear shrinkage % The difference between model dimensions and the model casting