ML9

for the production of shaped castings; max operating temperature: 250−300 ° C -Duration, 350−400 ° C -kratkovremennaya

Classification

Country	Section	Category
Country	Section	Category
CIS, Russia, Ukraine	Magnesium	Foundry magnesium alloys

Chemical composition

Standard	Fe, %	Si, %	Be, %	Mg, %	Cu, %	Zn, %	Ni, %	Zr, %	Al, %	Nd, %
Standard	Fe, %	Si, %	Be, %	Mg, %	Cu, %	Zn, %	Ni, %	Zr, %	Al, %	Nd, %
GOST 2856-79	< 0.01	< 0.03	< 0.001	95.25–97.5	< 0.03	< 0.15	< 0.005	0.4–1	< 0.02	1.9–2.6

Information on suppliers

Wish to advertise here?

Physical characteristics

Temperature, °C	$E\cdot 10^{9}$ , $MPa$	$\alpha\cdot 10^{6}$ , $K^{-1}$	$\varkappa$ , $\frac{W}{m\cdot K}$	$\rho$ , $\frac{kg}{m^3}$
Temperature, °C	$E\cdot 10^{9}$ , $MPa$	$\alpha\cdot 10^{6}$ , $K^{-1}$	$\varkappa$ , $\frac{W}{m\cdot K}$	$\rho$ , $\frac{kg}{m^3}$
20	43		117.2	1760
100		27.1

Mechanical properties at 20 °C

Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	$\sigma_{P}$ , $MPa$	$\epsilon_L$ , %	$KCU\cdot 10^{3}$ , $\frac{J}{m^2}$	Treatment
Rolling	Standard	Size, mm	Tension	Classifiers	$\sigma _{U}$ , $MPa$	$\sigma_{P}$ , $MPa$	$\epsilon_L$ , %	$KCU\cdot 10^{3}$ , $\frac{J}{m^2}$	Treatment
					250	120	6	70
Casting	GOST 2856-79			in sandy form	230	110	4

Standards

Standard	Description
Standard	Description
GOST 2856-79

Description of chemical elements

Element	Units of measurement	Description
Element	Units of measurement	Description
Fe	%	Iron
Si	%	Silicon
Be	%	Beryllium
Mg	%	Magnesium
Cu	%	Copper
Zn	%	Zinc
Ni	%	Nickel
Zr	%	Zirconium
Al	%	Aluminium
Nd	%	Neodymium

Description of physical characteristics

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
$E\cdot 10^{9}$	$MPa$	Elastic modulus
$\alpha\cdot 10^{6}$	$K^{-1}$	Coefficient of thermal (linear) expansion (range 20°C–T)
$\varkappa$	$\frac{W}{m\cdot K}$	Coefficient of thermal conductivity (the heat capacity of the material)
$\rho$	$\frac{kg}{m^3}$	The density of the material

Description of mechanical properties

Parameter	Units of measurement	Description
Parameter	Units of measurement	Description
$\sigma _{U}$	$MPa$	Ultimate tensile strength
$\sigma_{P}$	$MPa$	Proportionality limit
$\epsilon_L$	%	Elongation at break (longitudinal)
$KCU\cdot 10^{3}$	$\frac{J}{m^2}$	Impact toughness